Scientific and Technical Journal


ISSN Print 2221-3937
ISSN Online 2221-3805
The methods of calculating the basic iron loss asynchronous motors, in which the separation unit losses into two components (the hysteresis and eddy) is introduced coefficient reflecting the expansion of the hysteresis loop. The level of basic iron loss depends primarily on the grade and thickness electrical steel is used and the magnitude of induction. Each value corresponds to the induction of a specific value of specific losses in the steel. By separating the specific losses into two components determined iron loss at frequencies other than the base, and at nonsinusoidal voltage. Induction in the yoke and the induction in the tines depend on the magnitude of the magnetic flux, the electromotive force which is proportional to the mutual inductance and inversely proportional to frequency. Hence the value of major losses in the steel depends on two variables: the mutual electromotive force and frequency of magnetic reversal. The proposed coefficient reflecting the expansion of the hysteresis loop varies with the frequency of alternating current. Determination of the factor based on experimental data processing. Thus it formed the approach and analytical expressions for calculation of the basic loss of steel, which allows to specify the values ​​in induction motors, including those in regulated
DOI 10.15276/eltecs.24.100.2017.05
1. Statsenko, A. V.(2013), "Calculation of electromagnetic energy loss in the controlled induction motors with squirrel-cage rotor" ["Raschet elektromagnitnykh poter' energii v reguliruemykh asinkhronnykh dvigateliakh s korotkozamknutym rotorom"], Vіsnik Kiїvs'kogo natsіonal'nogo unіversitetu tekhnologіi ta dizainu, No.6, pp. 46-54.
2. Braslavskii, I. Ia., Ishmatov, Z. Sh., Poliakov, V. N. (2004),  Energy-savingasynchronouselectric.[Energosberegaiushchiiasinkhronnyielektroprivod],  AcademyPubl. Moscow. 256 p.
3. Vinogradov, A. B.(2005), "Allowance for losses in the steel, saturation and skin effect in the simulation of dynamic processes in the frequency-controlled asynchronous electric" ["Uchet poter' v stali, nasyshcheniia i poverkhnostnogo effekta pri modelirovanii dinamicheskikh protsessov v chastotno-reguliruemom asinkhronnom elektroprivode"], Elektrotekhnika, No.5, pp. 57–62.
4. Zaitsev, A. M., Zakharov, A. V., Kobelev,     A. S., Kruglikov, O. V.(2008),  "New series of variable-speed induction motors general purpose development of "NIPTIEM"" ["Novaia seriia chastotno-reguliruemykh asinkhronnykh dvigatelei obshchego primeneniia razrabotki OAO "NIPTIEM""], Elektrotekhnika, No. 9, pp. 2–10.
5. Kopylov, I. P. (2010),Electric cars.[Elektricheskie mashiny], Vysshaia shkolaPubl. M.607p.
6. Semykina, I. Iu.,"Gradient control in the solution of basic problems of electric" ["Gradientnoe upravlenie v reshenii osnovnykh zadach elektroprivoda"], Vestn. KuzGTU, No.1, pp. 99–103.
7. Petrushin, V.S. (2006), Textbook. Induction motors in adjustable electric [Uchebnoe posobie. Asinkhronnye dvigateli v  reguliruemom  elektroprivode], Science and TechnologyPubl. Odessa. 320 p.
8. Semykina, I. Iu.(2013), "On the question of the mathematical description of the iron loss of AC motors" ["K voprosu o matematicheskom opisanii poter' v stali elektrodvigatelei peremennogo toka"], Sovremennye problemy nauki i obrazovaniia, No .6, pp. 26.
9. Druzhinin, V.V. (1962), Textbook. The magnetic properties of electrical steel [Magnitnye svoistva elektrotekhnicheskoi stali], Leningrad, Gosenergoizdat. Publ. Moscow. 320 p.
10. Petrov, G.N. (1974), Textbook. Electric cars. Part 1 [Elektricheskie mashiny. Ch.1], Energiia Publ. Moscow. 240 p.
11. Kravchik, A. E., Shlaf, M. M., Afonin, V. I., Sobolenskaia, E.A. (1982),Induction motors 4A series: Directory [Asinkhronnye dvigateli serii 4A: Spravochnik], EnergoizdatPubl. Moscow. 504 p.
12. S. Motoaşcă. Improved evaluation of losses in soft magnetic materials / S. Motoaşcă, E. Helerea,  I.D. Oltean, G. Scutaru // Bulletin of the Transilvania University of Braşov . – 2009. -  vol. 2 (51)
13. Vinogradov, A. B., Gnezdov, N. E., Glebov, N. A., Zhuravlev, S. V. (2012)," Allowance for losses and saturation of steel with optimal vector control asynchronous electric traction" ["Uchet poter' i nasyshcheniia stali pri optimal'nom vektornom upravlenii tiagovym asinkhronnym elektroprivodom"], Vestnik IGEU, No.1, pp. 35–41.
14. GOST 21427.2-83 (1983), Electrical steel cold-rolled isotropic. Specifications (Amended N 1-5) Resolution of the State Standard of the USSR 21.06.1983 N 2610GOST from 21.06.1983 N 21427.2-83 [Stal' elektrotekhnicheskaia kholodnokatanaia izotropnaia tonkolistovaia. Tekhnicheskie usloviia (s Izmeneniiami N1-5) Postanovlenie Gosstandarta SSSR ot  21.06.1983 N 2610GOST ot 21.06.1983   N 21427.2-83]

Last download:
2018-05-26 11:34:40

[ © KarelWintersky ] [ All articles ] [ All authors ]
[ © Odessa National Polytechnic University, 2014. Any use of information from the site is possible only under the condition that the source link! ]