Scientific and Technical Journal

ELECTROTECHNIC AND COMPUTER SYSTEMS

ISSN Print 2221-3937
ISSN Online 2221-3805
OPTIMIZATION OF POWER TRANSFORMERS WITH CYLINDRICAL LAYERED WINDINGS WORKING FREQUENCY
Abstract:
The optimal values of technical and economic parameters of power transformers 63-630 kVA capacity at increase of working frequency level in the range of 50-500 Hz were defined. The optimal levels of working frequencies for the whole power range were defined. The design studies results were presented for example the power transformer TM400/10 with flat three core rod magnetic system made of electrical steel grade 3407, with a 0.35 mm thick and aluminum windings. The transformers economic efficiency composite index, total capitalization cost, used as the optimization criterion. The electrotechnical steel electromagnetic characteristics depending of the frequency determined by the refined method. Optimization studies implemented by the successive displacement method showed that the increase of the power transformers working frequency level to the optimum level can significantly improve their energy and resource efficiency.
Authors:
Keywords
DOI
References

          1.          Lizunov S.D., and Lokhanin A.K. Silovye transformatory. Spravochnya kniga [Power Transformers. Handbook], (2004), Moscow, Russian Federation, Energoizdat Publ., 616 p. (In Russian).

          2.          Balyan R.H., and Obrusnik V.P. Optimalnoe proektirovanie silovykh vysokochastotnykh ferromagnitnykh ustroistv [Optimum Design of Power high-frequency Ferromagnetic Devices], (1987), Tomsk, Russian Federation, Tomsk University Publ., 168 p. (In Russian).

          3.    Petkov R. Optimum Design of a High-Power, High-Frequency Transformer, 1996, Journal of Transactions on power Electronics Publ., Vol. 11(1), pp. 33 – 42.

          4.          BertinovА.I. Vliyanie chastoty na razmery i poteri transforma [The Frequency Influence on the Transformer Sizes and Losses], (1958), Izvestiya Vysshykh Uchebnykh Zavedeniy Elektromekhanika Publ., Moscow, Russian Federation, Vol. 1, pp. 107 – 113 (In Russian).

          5.Balashov К.К.,andKurilovV.V. Optimalnayachastotasilovyshtransformatorov [ThePower Transformers OptimalFrequency], (1968), ElektromekhanikaPubl., Moscow, Russian Federation, Vol.6, pp. 7 – 9 (In Russian).

          6.Tyurin Е.P. Transformatorypovyshenoychastitysmednymiialuminievymi obmotkami [TheHighFrequencyTransformerswithCuprumandAluminumWindings],(1966), ElektromekhanikaPubl., Moscow, Russian Federation, Vol.6, pp. 31 – 35 (In Russian).

          7.ABB green Distribution Transformer Program. Partnership for a Sustainable Environment, (2010), ABB Ltd. Publ., pp. 1 – 6, available at: www.abb.com/transformers (accessed 15.06.2010).

          8.Corhodzic S.,and Kalam A., (2000), Assessment of Distribution Transformers’ using Loss Capitalization Formulae, Journal of Electrical and Electronics Engineering Publ., Vol. 1,pp. 43 – 48.

          9.Nasypanaya Е.P. Podchod k raschetu udelnysh poter v elektroteshnicheskish stalyakh [Approach to Calculation of Specific Losses in Electrotechnical Steels], (2010) Journal of Tr. Odes. Nac. Politeshn. un.: Nauch. i ProizVodstvenno-prakticheskiy Sb. po Teshn. i Estestven. Naykam Publ., Odessa, Ukraine, Vol. 1, pp. 116 – 123 (In Russian).

       10. PuiloG.V., and Nasypanaya Е.P. Identifikaciaya udelnych poter v elektrotechnicheskoy staly magnitnykh sistem preobrazovateley elektricheskoy energyi pri razlichnykh rabochikh chastotakh [Identification of Specific Losses in Electrotechnical Steel of Electric Energy Converters Magnetic Systems with Various Working Frequencies], (2011), Journal of Elektromashinobuduvannaya taElektroobladnannya Publ., Odessa, Ukraine, Vol. 02 (78), pp. 42 – 47 (In Russian).

       11.. PlutaW.A., (2011), CoreLossModelsinElectricalSteelSheetswithDifferentOrientation, Journal ofPrzegladElektrotechniczny Publ., Vol. 9, pp. 37 – 42(In Russian).

       12.Puilo G.V., Levin D.M., and Trishenco E.V. Podsystema avtomatizirovannogo sinteza silovykh transformatorov so sloevymi obmotkami [Subsystem of the Power Transformers with Layered Windings Automated Synthesis], (2004), Elektrotekhnika i Elektromekhanika Publ.,Kharkov, Ukraine, Vol. 2, pp. 42 – 45 (In Russian).

Published:
Last download:
2017-11-16 12:35:28

[ © KarelWintersky ] [ All articles ] [ All authors ]
[ © Odessa National Polytechnic University, 2014. Any use of information from the site is possible only under the condition that the source link! ]
Яндекс.Метрика