Scientific and Technical Journal

ELECTROTECHNIC AND COMPUTER SYSTEMS

ISSN Print 2221-3937
ISSN Online 2221-3805
ENERGY OPTIMAL CONTROL METHODS OF INDUCTION DRIVE
Abstract:

This paper presents an energy optimal control methods of induction drive on criteria of minimum consumption of active, reactive and apparent power, and maximization of power factor. Depending selected criteria and rotor speed the algorithm calculates the coupling coefficient of stator currents, that determines the optimal stator currents. The simulation results of induction drive working on proposed methods are showed. The comparison between energy efficiency of proposed methods are presented. The simulation results showed that the extreme increasing of the one's of energy parameters can decrease others. The most multipurpose of the proposed control methods is the criteria of apparent power minimization, that allow a compromise between the consumed active and reactive power and increase the power factor. The selection of the control methods should be made on the specific developing tasks and environment conditions.

Authors:
Keywords
DOI
10.15276/etks.15.91.2014.84
References

1. Potapenko E.M., and Potapenko E.E. Robustnie algoritmi upravleniya asinhronnim privodom [Robust Algorithms of Vector Control of Induction Drive], (2009), ZNTU, Zaporizhzhya, Ukraine, 352 p (In Russian).

2. Braslavskiy I.Y., Z.S.Ishmatov, and V.N.Polyakov. Energozberigauzhiy asinchrinniy electroprivod [Energy-saving Induction Drive], (2004), Moscow, Russian Federation, Akademiya Publ., 256 p. (In Russian).

3. Polyakov V.N., and Shreiner R.T. Energoeffectivniye regimi reguliruemich electroprivodov peremennogo toka [Energy Effective Modes of Regulated Induction Drive], (2012), FGAOU BPO Russian State Professional-Pedagogical University, 222 p. (In Russian).

4. Ovsyannikov E. M., Nguen K.T., and Nguen X. T. Upravlenie tyagovi’m asinhronnim electroprivodom gibridny’h avtomobiley po minimumu poter’ i maksimumu peregrusochnoy sposobnosti. [Loss-Minimising and Maximum Torque Capability Control of Traction Induction Drive], (2009), Materialu 65-y Mezhd. Nauchn.-Techn. Konf. Assotsiatsii Automobil’nich Inzhenerow (AAI), Moscow, Russian Federation, pp. 120 – 129 (In Russian).

5. Lim S., and Nam K., (2004),Loss-Minimising Control Scheme for Induction Motors, IEE Proc.-Electr. Power Appl., Vol. 151, No. 4, pp. 385 – 397.

6. Potapenko E.M., and Shiyka A.A. Robastnoe upravlenie asinhronnim electroprivodom s mimimumom potreblyaemoy moshnosti [Robust Loss-Minimising Control of Induction Motor Drive], (2013), Electromehanichni i Energozberigayuchi Sustemi, Kremenchuk, KrNU, Ukraine, Vol. 2/2013 (19), pp. 315 – 320 (In Russian)

7. Peresada S., and Dymko S. Pryamoe vektornoe upravlenie momentom asinxronnih dvigateley s maksimizacziey sootnosheniya momenttok [Direct Tongue Vector Control of Induction Machine with Maximum Torque-Current Capability], (2011), Electotexnicheskie and Komp’yuterny’e Sistemy’. Kiev, Technika, Ukraine, Vol No. 03(79), pp. 28 – 31 (In Russian).

8. Kabushev A.V. Kompensatsiya reaktivnoy moshnosti v electroustanovkah promushlennih predpriyatiy [Reactive Power Compensation in Electrical Industry],

(2012), Tomsk, Russian Federation, Tomsk's Politechnical University, 234 p (In Russian).

Published:
Last download:
2017-11-17 10:05:58

[ © KarelWintersky ] [ All articles ] [ All authors ]
[ © Odessa National Polytechnic University, 2014. Any use of information from the site is possible only under the condition that the source link! ]
Яндекс.Метрика